Lenovo IdeaCentre B510 Quick Reference Manual page 2

Wireless keyboard and mouse
configuration
The wireless keyboard and mouse are pre-synchronized, for your
convenience, to work with your Lenovo PC. The keyboard and mouse
should work immediately after you install the batteries, and then turn on
the mouse and keyboard.
1. Install the batteries.
Close
Put 2 AA
batteries in the
keyboard's
battery
Battery
compartment
compartment.
2. Turn on the power switch.
Turn on the mouse power switch.
After installing the batteries, turn on the
power switch on the side of the keyboard.
You may need to manually synchronize the wireless keyboard or mouse
if they are not functioning.
To synchronize them, do the following:
1. Press the wireless connect button.
connect
2. Make sure the indicator lights blink and press the wireless reset button.
If connection is not established successfully, refer to "Wireless keyboard and
mouse instructions" in the User Guide.
31044806_IC_B5_QR_V2.0_(EN)(R).indd 2
Notes:
1) When establishing a wireless connection, it is recommended to
keep the distance from the keyboard/mouse to the computer less
than 25 cm (10 inches)
2) The effective working distance of the wireless keyboard and
mouse is 10 m (33 feet) (depending on the computer's working
environment).
If the wireless device does not work, do the following:
2 AA batteries
1. Be sure there is no physical obstacle between the wireless device
Put 2 AA batteries in the battery
compartment, making sure the
and the computer.
position of the polarities is
2. Restart the computer, and verify that the system devices are
identical to the image.
functional.
3. Repeat the procedure for establishing a Bluetooth connection.
4. Replace the batteries.
5. Do not place the computer under a metal surface or table.
If you do not plan
6. Make sure there are no electronic devices close by, such as
to use the mouse
for a long time, turn
speakers, remote controls of electronic toys or mobiles, which
off the mouse
might create high electromagnetic fields that could interrupt the
power switch to
save battery life.
wireless connection.
7. Place the keyboard, mouse and remote control the right way up.
8. Remove the batteries from the keyboard, mouse and remote
control if you do not plan to use them for a long time.
9. If the batteries in the keyboard, mouse or remote control leak,
clean the battery compartments as soon as possible and insert
new batteries.
10. Use batteries of good quality to ensure the proper function.
Press the
wireless
11. When battery power becomes low, the battery indicator light on
connect buttons
the keyboard will change from orange to red.
on the back of
the keyboard
and mouse.
When the keyboard and
When the battery indicator light blinks
mouse wireless indicator
lights blink white, press
red, it means that the battery power
and hold the wireless reset
becomes low.
button for over 5 seconds
until the indicator lights of
the keyboard and mouse
turned off.
LVT
4
When the battery indicator light blinks white,
it means that the keyboard or mouse is
14
being connected.
LVT :
After entering Windows, press this key to
launch the LVT (Lenovo Vantage
Technology) program, Lenovo's
pre-loaded Home PC software. In addition
to its own functions, the LVT program will
allow you to start other Windows
compatible software, specially configured
to run on this model of computer.
Computer instructions
Built-in microphone
Camera
Indicator lights ON/OFF button
Volume down
Volume up
Brightness down
Brightness up
LCD On/Off
1 — Optical drive
—
2 Power button
3 — Card reader
— USB ports (2)
4
—
5 Headphone connector
6 — Microphone connector
2
3
5
1
6
7 — AV-IN connector
(Selected models only)
8 — PS/2 Keyboard connector
—
9 Ethernet connector
7
8 10 —
USB ports (2)
9
11 — TV-Tuner connector
10
11 (Selected models only)
13
12
12 — eSATA port
13 —
Wireless reset button
14 —
Power connector
2010-7-21 14:23:15