Advertisement
5. Wireless keyboard and mouse instructions (Only some models are equipped with wireless keyboard and mouse)
The wireless keyboard and mouse are pre-synchronized, for your convenience, to work with your Lenovo PC. The keyboard and mouse should work immediately after you pull the battery tabs to activate the preinstalled
batteries(or install the batteries), and then turn on the mouse.
Remove the battery tabs from both the keyboard and the mouse (or install the batteries into the battery
compartments).
Remove the battery tabs from
both the keyboard and the
mouse.
You may need to manually synchronize the wireless keyboard or mouse if they are not functioning.
To synchronize them, do the following:
1. Press the wireless connect button.
CONNECT
Make sure the power switch
on the back of the mouse is
in the ON position (the
keyboard does not have a
CONNECT
LASER
power switch).
OFF ON
CONNECT
Press the wireless connect
OFF ON
buttons on the right side of the
keyboard and the back of the
mouse.
CONNECT
LASER
OFF ON
2. Make sure the indicator lights blink and press the bluetooth connect button.
When the keyboard and mouse wireless indicator lights blink green, press the bluetooth connect button on the base stand for
over 5 seconds until the indicator lights of the keyboard and mouse turned off.
Bluetooth
connect button
Mode switch
button
If connection is not established successfully,
refer to "Wireless keyboard and mouse
instructions" in the User Guide.
Advertisement
