A.1 Installing in Windows 98
This section explains the procedure to install the driver when using Windows 98.
Installation method
The following describes the step-by-step installation procedure. The CD-ROM drive is assumed as E: in the
explanation below.
Step 1
Shutdown Windows 98 and turn off the power of the host machine.
Shutdown Windows 98 and turn off the power of the host machine.
Step 2
Insert the IE-V850E1-CD-NW in an open PC card slot.
Insert the IE-V850E1-CD-NW in the PC card slot on the host machine in the direction of the arrow on the
surface (refer to Figure 2-3 Installing IE-V850-CD-NW).
Step 3
Turn on the power to the host machine and activate Windows 98.
Apply the power to the host machine and activate Windows 98.
34
APPENDIX A INSTALLATION OF DRIVER
User's Manual U16647EJ1V0UM