Applying An Effect To A Sound Sample - Casio CTK-2090 User Manual

Sampling a Sound and Playing it on the Keyboard (Sampling)

Applying an Effect to a Sound Sample

Use the procedure below to apply effects to a sample that was recorded using either long sampling or short sampling.
1.
Press one of the five
Example: Button 1 (tone number 412)
Original tone 3 Loop 1 3 Loop 2 3 Original tone 3
See the "Sampled Sound Tone Numbers" table below for details about the effects that are assigned to each button.
■ Sampled Sound Tone Numbers
The original sampled sound and its modified (by effects) versions are assigned to sequential tone numbers (the same as built-
in tones). This makes it easy to select a version of a sampled sound using
SAMPLED TONES/
Tone No.
EFFECTS button
1
2
3
4
5
1
2
3
4
5
EN-14
bq ck
- (SAMPLED TONES/EFFECTS) buttons to cycle through available effects.
Effect Name
401 Original Long
402 Loop 1 Long
403 Loop 2 Long
404 Loop 3 Long
405 Pitch 1 Long
406 Pitch 2 Long
407 Pitch 3 Long
408 Tremolo Long
409 Funny 1 Long
410 Funny 2 Long
411 Funny 3 Long
412 Original Short 1
413 Loop 1 Short 1
414 Loop 2 Short 1
415 Original Short 2
416 Loop 3 Short 2
417 Pitch 1 Short 2
418 Original Short 3
419 Pitch 2 Short 3
420 Pitch 3 Short 3
421 Original Short 4
422 Tremolo Short 4 Alternates volume between high and low.
423 Funny 1 Short 4 Adds vibrato and changes pitch by a gradually increasing amount.
424 Original Short 5
425 Funny 2 Short 5 Alternates between high pitch and low pitch.
426 Funny 3 Short 5 Adds vibrato and changes pitch from low to high.
–
Loops the sampled sound.
Loops the sample sound and raises the pitch of the resonating sound when
the keyboard key is released.
Loops the sample sound and lowers the pitch of the resonating sound when
the keyboard key is released.
Changes the pitch from low to high, at an increasing rate.
Changes pitch from high to low, at a decreasing rate.
Changes pitch from high to low, at a decreasing rate, and then raises the
pitch when the key is released.
Alternates volume between high and low.
Adds vibrato and changes pitch by a gradually increasing amount.
Alternates between high pitch and low pitch.
Adds vibrato and changes pitch from low to high.
–
Loops the sampled sound.
Loops the sample sound and raises the pitch of the resonating sound when
the keyboard key is released.
–
Loops the sample sound and lowers the pitch of the resonating sound when
the keyboard key is released.
Changes the pitch from low to high, at an increasing rate.
–
Changes pitch from high to low, at a decreasing rate.
Changes pitch from high to low, at a decreasing rate, and then raises the
pitch when the key is released.
–
–
bp
(10-key).
Description