Lenovo 3000 Q100 User Manual page 99

Set for speaker pre-configured as 2.0:
8
Lenovo 3000Q User Guide
Step 1
Select 2CH Speaker on the screen as
illustrated. Then connect the Line-in cable of
the speaker to the green connector.
Step 2
Check "Line Out" in the dialog box popped
up as illustrated.
If you want to connect other audio devices,
connect the audio cables respectively to the
I/O connectors on the rear panel. Every time
a connector is connected, a dialog box
pops up as illustrated. Select appropriate
name according to the device connected
with the audio cable.