NordicTrack NTL99010.3 User Manual page 13

13. Set the console assembly on the Left Handrail
(88) and the Right Handrail (87). Be careful not
to pinch any wires. Insert the excess Upright
Wire (not shown) into the Left Handrail.
Attach the console assembly with six #8 x 1/2"
Screws (1) and two #8 x 3/4" Screws (2) (only
one side is shown). Start all eight Screws, and
then tighten them.
Attach two Console Clamps (106) to the console
assembly with four #8 x 1" Screws (25).
See step 8. Fully tighten the four 5/16" x 1"
Screws (5) and the two 5/16" x 1 1/4" Bolts (4).
14. Firmly tighten the four 3/8" x 2 3/4" Screws (7),
Then, tighten the four 3/8" x 1 1/4" Screws (8)
(only one side is shown).
Press the Left Base Cover (82) and the Right
Base Cover (83) onto the Base (94) until they
snap into place.
13
106
25
1
1
87
14
82
7
8
94
13
Console
Assembly
106
25
2
1
1
88
83