Lenovo V370 User Manual page 35

6 If two SO-DIMMs are already installed in the memory slot, remove one of
them to make room for the new one by pressing out on the latches on
both edges of the socket at the same time. Be sure to save the old SO-
DIMM for future use.
7 Insert the notched end of the DIMM into the socket.
Press the DIMM firmly, and pivot it until it snaps into place. Make sure
that it is firmly fixed in the slot and does not move easily.
8 After aligning the attachment clips with their matching gaps, reinstall the
compartment cover.
9 Tighten the screws.
0 Reinstall the battery.
A Turn the computer over, and reconnect the AC adapter and the cables to
the computer.
Note: If only one DDR3 SDRAM is used on the computer you are servicing, the card must bel
installed in SLOT-0 (
1
2
: lower slot), but not in SLOT-1 (
b
Appendix A. CRU instructions
1
: upper slot).
a
31