Lenovo E43 User Manual page 41

5
In the initial screen display, press F2 to enter the BIOS Setup Utility.
After that use the cursor keys, and select Advanced. Set up the AHCI
mode in SATA Mode Selection , and press F10 to save settings and
exit.
Main
Legacy OS Boot:
SATA Mode Selection:
Modem Device:
WLAN Device:
LAN Device:
WWAN Device:
Express Card Device:
1394 Device:
Media slot Device:
PC Card Device:
Serial Port Device:
Bluetooth Device:
USB Port Device:
USB Port Device:
USB Port Device:
E-SATA Device:
F1 Help
Esc Exit
6
Turn on the computer and enter Windows XP system. Install the left
driver in the supplied drive disc, and thus complete the installation of
the OS and all the drivers.
Phoenix SecureCore(tm) Setup Utility
Advanced Security Boot
[Enabled]
[AHCI]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Select Item -/+ Change Values
Select Menu Enter Select
Chapter 2. Using your computer
Exit
Item Specific Help
Determines how SATA
controller(s) operate.
F9 Setup Defaults
Sub-Menu F10 Save and Exit
35