Table of Contents
Advertisement
6 Pull the tab in the direction shown by arrow
7 Take out the hard disk drive secured in a metal frame
8 Remove the screws and detach the metal frame from the hard disk drive.
9 Attach the metal frame to a new hard disk drive and tighten the screws.
0 Put the hard disk drive gently into the hard disk drive bay with the tab
facing upwards and the connectors facing each other; then push it firmly
into space.
A Reinstall the frame fixing screw.
B After aligning the attachment clips with their matching gaps, reinstall the
compartment cover.
C Tighten the screws.
D Reinstall the battery pack.
E Turn the computer over again. Connect the AC adapter and the cables to
the computer again.
Appendix A. CRU instructions
a
.
a
b
.
b
31
Advertisement
Table of Contents
