Table of Contents
Advertisement
Temperature
with garment care label
symbols
Outdoor
Warm+ 105°F/40°C
Warm
85°F/30°C
Cold
Cold
Proofing
Warm+ 105°F/40°C
Drain / Spin
- Drain only: Set spin speed to .
Cold
- Make sure you select the appropriate spin speed.
Performance outerwear (e.g., jackets and
trousers) made from membrane fabric such as
Gore-Tex®, SYMPATEX®, WINDSTOPPER®,
etc.
- Zip up or close any jackets with Velcro before
washing.
- Do not use fabric softener.
- If required, these garments can also be re-
proofed using the Proofing program.
Reproofing after each wash cycle is not
recommended.
Treating microfiber fabric, ski wear, or table
linens made from mainly synthetic fibers to
provide a finish which is resistant to water and
dirt.
- The items should be freshly laundered and
spun or dried before proofing.
- For best results, the items should be heat-
treated afterwards either in a tumble dryer or
by ironing.
Program guide
Item/Tip
Small load (5.5 lb/2.5 kg)
Small load (5.5 lb/2.5 kg)
Full load (17.6 lb/8 kg)
35
Advertisement
Table of Contents
