Notice for use
Product overview
Adjustment type
Tilt
To set up your monitor, please see the illustrations below�
Note: Do not touch the screen of the monitor� The screen is made of glass and can be damaged by
rough handling or excessive pressure�
1�
Place your monitor with the screen face down on a soft flat surface
2�
Insert the base towards the stand until it locks in place�
3�
Align the stand assembly bracket to the monitor�
Note: To connect VESA mounting accessories, refer to "Wall Mounting (Optional)" on page 2-9�
In this section, we will describe how to adjust the position of the monitor; how to set user controls;
how to use the cable lock slot�
Please see the illustration below for an example of the tilt range�
1
Chapter 1� Getting started 1-2