Advertisement
4.12 TIME TO END
To select option "Time to end", press the "Option selection" button. By pressing the "Confirm option" but-
1.
ton repeatedly, you can select when the wash cycle ends. The "Time to end" function calculates the initial
duration of the washing/drying cycle, the settings made (temperature, spin speed and options) which may
shorten or lengthen the cycle's initial duration, and the delay time the user wishes to add before the cycle
starts.
After the "Time to end" has been set, the symbol on the display remains on.
2.
To clear the "Time to end" function, you must select the option by pressing the button "Option selection" ,
3.
then press the "Confirm option" button until the display shows 0.
4.
The Start/Pause symbol flashes on and off until the cycle starts. After the cycle starts, the symbol re-
mains constantly lit.
4.13 STARTING THE WASHING PROGRAMME
1.
To start the washing programme after making your personal settings, press the Start/Pause button.
2.
Once the cycle has started, the display shows the time remaining before the end of the cycle and the
Start/Pause symbol on the display is constantly on.
3.
During performance of the washing/drying programme, the symbols which identify various phases light
up:
Cycle phase symbols: Prewash, Wash, Rinses, Final spin and Dry.
Option Time to end
Option selection
Confirm option
EN
Time to
end
symbol
Start/Pause
symbol
Start/Pause
15
Advertisement
