Using Vgaconf From The Command Line - Epson ActionNote 4SLC/25 User Manual

Select
Timer
disable standby mode. When you select
prompts:
Standby Time (minutes):
Time-out on (K) eyboard activity or (Wemory
access (K/M) :
Enter the number of minutes to wait before entering standby
mode and press. Then enter
activity. If you enter
if there is no keyboard activity for the specified number of
minutes. If you enter
if video memory is not accessed for the specified number of
minutes. Press
The standby mode initiated by the VGACONF utility is exactly
the same as Suspend mode. You can reactivate the system at
any time by pressing the [SARI key.
Select to exit the VGACONF program and return to the
Quit
operating system prompt.
Using VGACONF From the Command fine
To quickly change one or more VGA configuration settings,
you can initiate VGACONF from the command line with
option parameters. At the command prompt, enter the
VGACONF command in the following format:
VGACONF [options]
to set a period, or select
timeout
the LCD panel will enter standby mode
K,
, the LCD panel will enter standby mode
M
to initiate the timer.
Normal
you see these
Timer,
or to indicate the type of
K
Using the VGA Utilities
to
7-9