Table of Contents
Advertisement
Setting Extra Dry
Press
.
1.
To open the appliance settings,
2.
press
is flashing on the display.
a
Press
3.
and
flash in the display.
Press
repeatedly until the
4.
LEDs show the right value.
If "LED A" → Page 15 is not lit, Ex-
tra Dry is switched off.
If "LED A" → Page 15 is lit, Extra
Dry is switched on.
To save the settings, press
5.
for 3 seconds.
Set Wi-Fi
Press
.
1.
To open the appliance settings,
2.
press
is flashing on the display.
a
Press
3.
and
flash in the display.
Press
repeatedly until the
4.
LEDs show the right value.
If "LED A" → Page 15 is not lit, the
wireless network connection is
switched off.
If "LED A" → Page 15 is lit, the
wireless network connection is
switched on.
To save the settings, press
5.
for 3 seconds.
Activating Remote Start
Press
.
1.
To open the appliance settings,
2.
press
is flashing on the display.
a
Press
3.
flashes on the display.
Press
repeatedly until the
4.
LEDs show the right value.
for 3 seconds.
repeatedly until
for 3 seconds.
repeatedly until
for 3 seconds.
repeatedly until
If LED A lights up, the function is
permanently deactivated.
If LED A and LED B light up, the
function can be selected using the
button.
If LED A, LED B and LED C light
up, the function is permanently ac-
tivated.
The factory setting is level 2 ("LED
A and LED B" → Page 15).
To save the settings, press
5.
for 3 seconds.
Setting signal volume
Press
.
1.
To open the appliance settings,
2.
press
is flashing on the display.
a
Press
3.
and
flash in the display.
Press
repeatedly until the
4.
right signal volume has been set.
0, 1, 2 or 3 LEDs will light up ac-
cordingly. The signal tone selected
will be heard.
The factory setting is level 2 ("LED
A and LED B" → Page 15).
To save the settings, press
5.
for 3 seconds.
Restoring factory settings
Press
.
1.
To open the appliance settings,
2.
press
is flashing on the display.
a
Press
3.
and
flash in the display.
Press
to set the appliance
4.
back to the factory settings.
a The appliance is reset.
Basic settings en
for 3 seconds.
repeatedly until
for 3 seconds.
repeatedly until
,
35
Advertisement
Table of Contents
