Removal And Installation Of Headrest - Komatsu ecot3 HD325-7 Operation & Maintenance Manual

ATTACHMENTS, OPTIONS

REMOVAL AND INSTALLATION OF HEADREST

REMOVAL
If the headrest is not needed, remove it as follows.
1. Pull up the headrest to the position where it stops.
2. From the top of the seat back, turn stopper (1) (under the
material at the top of the seat) of the headrest bar on one side
in the direction of the arrow, and pull up the headrest.
When stopper (1) is turned, it will come out of groove (2).
3. Turn stopper (1) on the other side in the direction of the arrow,
and pull up the headrest.
When both stoppers (1) come out of groove (2), the headrest
can be removed.
INSTALLATION
1. Insert the bars into the holes in the top of the seat and push
down.
HANDLING AIR SUSPENSION SEAT
6 - 5