Advertisement
26
P
lacing and Leveling
Please ensure that transit restraint has been removed before operating your machine.
1
Place the machine on a at and rm surface which allows proper clearance.
We suggest a minimum clearance of 2 cm to the
right side and left sides of the machine for ease of
installation.
At the rear, a minimum clearance of 10 cm is
suggested.
If the washer is installed on a uneven,weak or tilted floor causing excessive vibration,
spin failure or "
It must be placed on a firm and level floor to prevent spin failure.
2
Check that the machine is level
Open the lid and look from above to see if it is
same as shown.
3
Leveling the machine
Lift the front of the washing machine and twist
the Adjustable Leg until the washing machine is
placed evenly.
Installing the Anti-Rat Cover (option) Insert the anti-rat cover to be firmly fixed
from the back or front of washing machine and screw it (1pcs or more on some
models)
If the power is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
" error can happen to it.
SETTING SCREW
BACK
U P
more
than
2 cm
FRONT
Anti-Rat Cover
U P
more than 10 cm
more than
2 cm
Top view of the machine
Adjustable legs
Anti-Rat
Cover
SETTING SCREW
Rev. : 02 (12T14)
Advertisement
