CITROEN C3 Handbook page 71

► Raise the vehicle until there is sufficient
space between the wheel and the ground to
admit the spare (not punctured) wheel easily.
Ensure that the jack is stable. If the
ground is slippery or loose, the jack
may slip or collapse - risk of injury!
Take care to position the jack strictly at
one of the jacking points A or B under the
vehicle, ensuring that the head of the jack
is centred under the contact area of the
vehicle. Otherwise, there is a risk of damage
to the vehicle and/or of the jack collapsing -
risk of injury!
► Remove the bolts and store them in a clean
place.
► Remove the wheel.
Fitting a wheel
► Fit the wheel on the hub.
► Screw in the bolts by hand as far as possible.
► Pre-tighten the bolts using the wheel
wrench 3 only.
► Lower the vehicle again fully.
► Fold jack 1 and remove it.
In the event of a breakdown
► Tighten the bolts using the wheel wrench
3 only.
► Refit the bolt cover (depending on
equipment).
► Store the tools.
Putting the spare wheel
back in place
► Put the spare wheel back in its housing.
8
69