Table of Contents
Advertisement
All JF1 wires have been bundled into single keyed ribbon cable to simplify their con-
nection. Connect one end of this cable to JF1 and the other end to the Control Panel
printed circuit board, located just behind the system status LEDs in the chassis.
See the Connector Defi nitions section in this chapter for details and pin descrip-
tions of JF1.
Figure 5-2. Front Control Panel Header Pins (JF1)
Blue+ (OH/Fan Fail/
PWR FaiL/UID LED)
5-4
I/O Ports
The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-3 below for the colors and locations of the various I/O ports.
1
1. COM1 Port
2. USB Port 0
3. USB Port 1
4. Dedicated IPMI LAN
5. USB Port 2
Chapter 5: Advanced Serverboard Setup
20
19
Ground
NMI
X
X
3.3 V
FP PWRLED
HDD LED
ID_UID_SW/3/3V Stby
NIC1 Link LED
NIC1 Activity LED
NIC2 Activity LED
NIC2 Link LED
Red+ (Blue LED Cathode)
Power Fail LED
3.3V
Reset
Ground
Ground
PWR
2
1
Figure 5-3. Rear Panel I/O Ports
4
6
3
5
7
2
Backplane I/O Ports
6. USB Port 3
7. LAN Port 1
8. LAN Port 2
9. VGA Port
10. UID Switch
5-7
Reset Button
Power Button
8
9
1
1 0
Advertisement
Table of Contents
