Using The Panorama Mode - Samsung ST93 User Manual

Shooting modes

Using the Panorama mode

In Panorama mode, the camera captures and combines a series
of photos to create a panoramic image.
1
In Shooting mode, press [
2
Select Panorama.
• The Up/Down/Left/Right arrows appear on the display.
3
Align your subject in the frame, and then half-press
[Shutter] to focus.
4
Hold and press [Shutter] to start Panorama shooting.
5
While pressing and holding [Shutter], slowly move the
camera in the desired direction.
• The arrow for the direction you are moving in is displayed in
blue and the preview box for the images appears.
].
Extended functions
▼ When rotating the camera to the right
6
Release [Shutter] to finish shooting.
• A panoramic image is created.
• If you release the [Shutter] while shooting, the panoramic
shooting stops and photos that have been taken are saved.
• Depending on the camera movement or shooting environment below,
photos may not be smoothly connected.
- there is excessive camera shake
- you take a close-up shot
- the environment is too dark
- when shooting under a flashing light, e.g., a fluorescent lamp
- when the brightness, color or focus changes rapidly during shooting
• Photos that have been taken up until the cases below occur are
saved automatically, and shooting is stopped forcibly.
- the camera is moving too fast
- you are changing the direction of the camera while shooting
- the camera is not moving
• Since the last scene in Panorama mode may not be taken due to the
quality of the photo if shooting is halted, it is recommended to shoot
beyond the desired ending point.
35
The direction you are moving
the camera in