en-us Basic Operation
12.7 Activating the button lock
The button lock prevents the appliance from being
operated accidentally or incorrectly while running.
Press
for approx. 3 seconds.
▶
a The button lock is activated and will be automatically
deactivated at the end of the cycle.
a The button lock remains activated with a power failure.
12.8 Deactivating the button lock
Press
for approx. 3 seconds.
▶
12.9 Interrupting the wash cycle
Press On/Off.
1.
The program is saved and the appliance switches off.
Press On/Off.
2.
Press
to resume the wash cycle.
3.
12.10 Terminating the wash cycle
To end a cycle early or to switch from one that has already
started, you will need to cancel it first.
Press
for approx. 4 seconds.
▶
a All displays light up.
a As soon as the displays are off, the residual water is
pumped out.
a The cycle is cancelled and ends after approx. 1 minute.
12.11 Switching off the appliance
CAUTION
To avoid risk of injury, always use caution when opening
the door during or following a wash cycle as hot water or
steam may escape.
Do not fully open the door until water noises have
▶
stopped and steam has subsided.
Please note the information on Preventing Material
1.
Damage → Page 6 .
Press On/Off.
2.
18