Connecting To A Power Source; Inserting The Memory Card - Samsung S1065 Manual

Connecting to a Power Source

Insert the battery as shown
- If the camera does not turn on after
you have inserted battery, please
check whether the battery (+ / -).
- When the battery chamber cover
is opened, do not force the battery
chamber cover, this may damage it.
There are 4 indicators for battery condition that are displayed on the
LCD monitor.
Battery
indicator
Low battery
Battery
The battery is
(Prepare to
status fully charged
recharge or use
spare battery)
When using the camera and the battery in a place that is excessively cold or hot,
the battery status on the LCD may be different from the actual battery status.
12 _READY
Low battery
Battery empty.
capacity capacity
(Recharge or
(Prepare to
use spare bat-
recharge or use
spare battery)

Inserting the memory card

Insert the memory card as shown.
- Turn off the camera's power
before inserting the memory card.
- Have the front of the memory
card facing toward the front of the
camera (lens) and the card pins
toward the back of the camera
(LCD monitor).
- Do not insert the memory card
the wrong way round.
Doing so may damage the
memory card slot.
tery)