Table of Contents
Advertisement
Operating
7
Operating
7.1 Starting up the device
7.2 Main menu
26
Connect the unit to the power grid to start the operation. After a few seconds the display
shows a running reset. The unit is then ready for use.
Press [M] to call the main menu and select an operating mode. Use the arrow keys to change
the respectively shown value. When the display shows the desired value, press [OK].
If you don't press any button for about a minute, the unit will return to the previous mode. The
set values are retained even when the device is disconnected from the power supply.
LED PAR
Advertisement
Table of Contents
