Advertisement
按住
（电源） 按钮直至
（电源） LED指示灯亮起， 以打开
打印机电源。
设置语言和日期/时间， 然后选择使用的黑色墨水类型。
Hold down the
(power) button until the
lights up to turn on the printer.
Set language and date/time, then select which type of black
ink you use.
将ＣＤ插入计算机。遵循屏幕指示安装打印机驱动程序并
连接打印机。
Insert the CD in the computer. Follow the on-screen instructions
to install the printer driver and connect to the printer.
(power) LED
ON
摇晃墨盒，然后从包装中取出，并按照屏幕指示进行安装。
等待至注墨完成并显示确认屏幕。
Shake the ink cartridges and then unpack and install them
following the on-screen instructions.
Wait until ink charging is finished and confirmation screen is
displayed.
Caution: 注意 ：
开始注墨后， 则无法更改黑色墨水类型。
Once you start charging ink, you cannot
change the black ink type.
在打印机驱动程序中进行纸张设置，然后在打印机上装入
纸张。请查看视频（ＱＲ码）或ＣＤ中的用户指南。
Make the paper settings on the printer driver, and then load
paper on the printer.
See the video (QR code) or the User's Guide in the CD.
https://www.epson-biz.com/?prd=cw-c4k
&inf=video_sc
©Seiko Epson Corporation 2022. Printed in XXXXXX/YYYYYYYYYYYY
19 min.
Advertisement
