Target Group; Operation; Making Settings - Dometic NDS IM12-150 Short Operating Manual

5

Target Group

The mechanical and electrical installation and setup of the device must be performed by a qualified
technician who has demonstrated skill and knowledge related to the construction and operation of
automotive equipment and installations, and who is familiar with the applicable regulations of the
country in which the equipment is to be installed and/or used, and has received safety training to
identify and avoid the hazards involved.
6

Operation

1. Switching the battery monitor on or off:
Fig.  on page 1
2. Displaying the battery voltage and current:
Fig.  on page 1
3. Activate the automatic mode by tapping the
4. Activating the manual mode:
Fig.  on page 2

Making settings

Open the basic settings by tapping the
The following settings can be made:
• Setting the language
• Setting the house battery 1 type and capacity
• If available, setting the house battery 2 type and capacity
• Setting the date and time
Fig. 
Open the secondary settings by tapping the
Display the next screen by tapping the
Display the previous screen by tapping the
Increase a value by tapping the
Lower a value by tapping the
Select a setting by tapping the
Deselect a setting by tapping the corresponding
Confirm the setting by tapping the
Cancel the set setting by tapping the
8
on page 3 Fig. 
icon.
icon.
icon.
icon for a few seconds.
on page 3
icon shortly.
icon.
icon.
icon.
icon.
icon.
icon.