Screen Protection; Starting Your Device For The First Time - Sony G3226 User Manual

1
Using your fingernail, drag out the nano SIM card tray.
2
Firmly place the primary SIM card (SIM 1) in the correct orientation in position
(1) as shown in the illustration.
3
Firmly place the additional SIM card (SIM 2) in the correct orientation in
position (2) as shown in the illustration.
4
Insert the memory card in the correct orientation into the memory card slot as
shown in the illustration.
5
Gently push the tray back into the slot until it fits into place.
To remove the nano SIM card
1
With the screen facing down, open and drag out the nano SIM card tray using
your fingernail.
2
Remove the nano SIM card, then gently push the tray back into the slot until it
fits into place.
To remove a memory card
1
Turn off your device.
2
With the device facing down, drag out the cover for the nano SIM card tray.
3
Gently push and remove the memory card, then gently push the tray back into
the slot until it fits into place.

Screen protection

Before using your device, remove the protection film by pulling up on the protruding tab.
It is recommended to protect your device with a Sony branded screen cover or a
protector intended for your Xperia™ model. The use of third party screen protection
accessories may prevent your device from working correctly by covering sensors,
lenses, speakers, or microphones and can invalidate the warranty.

Starting your device for the first time

It is recommended that you charge the battery for at least 30 minutes before starting
up your device for the first time. You can still use your device while it is charging, see
Charging your device on page 34.
The first time you start your device, a setup guide helps you to configure basic
settings, personalise your device and sign in to your accounts, for example a
Google™ account.
To turn on the device
It is important to use the USB Type-C™ cable (provided) when charging your device as other
types of USB cable can damage your device. It is recommended to charge the battery for at
least 30 minutes before you turn on the device for the first time.
This is an internet version of this publication. © Print only for private use.
8