Table of Contents
Advertisement
Available languages
Available languages
Operations
Control panel
01 Cycle Selector
02 Display
03 Temp.
04 Spin
05 Options
06 Delay End
Q1256S_DC68-03506Q_EN.indd 29
01
Turn the dial to select a cycle.
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press to change the spinning speed for the current course.
• Rinse Hold (No indicator) : The final rinse process is suspended so
that the laundry remains in the water. To unload the laundry, run a
drain or spin process.
• No Spin
: The drum does not spin after the final drain process.
Press to select an option from Intensive(
Intensive(
) + Prewash(
(
) + Rinse+(
), Intensive(
again to deselect.
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined by
the machine's internal logic. For example, this setting is useful for
programming your machine to finish a wash at the time you normally
return home from work.
• Press to choose a preset unit of hours.
02
03
04
05
06
), Prewash(
), Intensive(
) + Rinse+(
) + Prewash(
) + Rinse+(
08
07
09
), Rinse+(
),
), Prewash
). Press
English 29
2015/5/14 14:15:22
Advertisement
Table of Contents
