Dell 0D8MH Service Manual page 61

Table 7. System setup options—Storage menu (continued)
Storage
SATA/NVMe Operation
Storage Interface
Port Enablement
Smart Reporting
Enable Smart Reporting
Drive Information
Table 8. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Full Screen Logo
Table 9. System setup options—Connection menu
Connection
Wireless Device Enable
WLAN
Bluetooth®
Enable UEFI Network Stack
Dynamic Wireless Transmit Power
HTTP(s) Boot Feature
HTTP(s) Boot
HTTP(s) Boot Modes
Configures operating mode of the integrated storage device controller.
Default: RAID On. Storage device is configured to support RAID functions.
When enabled, all NVMe and SATA devices will be mapped under VMD
controller. Windows RST (Intel Rapid Restore Technology) driver, or Linux
kernel VMD driver must be loaded in order to boot the OS.
Enables or disables the onboard drives.
Default: ON
Enables BIOS to receive analytical information from integrated drives and send
notifications during startup about possible future failure of the hard drive.
Default: OFF
Displays the information of various onboard drives.
Sets the screen brightness when the computer is running on battery power.
Default: 40
Sets the screen brightness when the computer is running on AC power.
Default: 40
Enables or disables display of full screen logo if the image matches screen
resolution.
Default: OFF
Enables or disables internal WLAN device.
Default: Selected
Enables or disables internal Bluetooth device.
Default: Selected
Enables or disables the UEFI Network Stack.
Default: Selective Enabled
Enables or disables increase of transmit power of WLAN device.
Default: Selected
Enables or disables HTTP(s) boot.
Default: ON
Enables selection of Auto or Manual boot mode.
Default: Auto Mode
System setup 61