LG LF30H8210 Series Owner's Manual page 25

Press and hold the Wi-Fi button for 3 seconds to connect to the network. The indicator blinks while the
connection is being made and then turns on once the connection is successfully made.
Refrigerator
e
Indicates the set temperature of the refrigerator compartment in Celsius (°C) or Fahrenheit (°F). The
default refrigerator temperature is 37 °F (3 °C). Press the Refrigerator button repeatedly to select a
new set temperature from 33 °F to 43 °F (1 °C to 7 °C).
NOTE
• To change the temperature mode from °F to °C (or vice versa) press and hold the Refrigerator and
Freezer buttons simultaneously for approximately five seconds. The temperature indicator on the
display window switches between Celsius and Fahrenheit.
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
Water Filter
f
Replace the water filter when the Water Filter indicator turns on. After replacing the water filter, press
and hold the Water Filter button for three seconds to turn the indicator light off. Replace the water
filter approximately every six months.
†
Cubed Ice
g
Press the Cubed Ice button to turn the Cubed Ice icemaker on/off.
Lock
h
The lock function disables every other button on the display.
• When power is initially connected to the refrigerator, the lock function is off.
• To lock the control panel buttons, press and hold the Lock button until the indicator appears in the
display and the function is activated.
• To disable the function, press and hold the Lock button for approximately three seconds.
Full-Convert Drawer
i
Adjust the temperature of the convertible drawer to either colder or warmer than the refrigerator.
Refer to Full-Convert Drawer
NOTE
When the refrigerator is in the Power Saving Mode, the display remains off until a door is opened or a
button is pressed. Once on, the display remains on for 20 seconds.
Display Mode and InstaView Display Mode (For Store Use Only)
• The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while
on display in a retail store. When activated, OFF is displayed on the control panel and the display remains
on for 20 seconds.
- To deactivate/activate the Display Mode:
Open either refrigerator door. Press the Ice Plus button 3 times while pressing and holding the
Refrigerator button. The control panel beeps and the temperature settings display to confirm that
Display Mode is deactivated. Use the same procedure to activate Display Mode.
• The InstaView Display Mode automatically turns the LED light inside the InstaView Door-in-Door on and
off in cycles of 10 seconds ON and 2 minutes 50 seconds OFF.
- To activate the InstaView Display Mode:
Activate the Display Mode first. Then open all refrigerator and freezer doors and within 5 seconds
knock 3 times on the door glass.
- To deactivate the InstaView Display Mode:
TM
TM
in the Operation section.
OPERATION 25