Table of Contents
Advertisement
If your computer is installed with a hybrid solid-state drive (with Intel Optane memory), go to
support.lenovo.com/docs/tg_ssd
Removal steps of the M.2 solid-state drive
Step
Screw (quantity)
1
M2 × 3 mm, flat-head, nylon-coated (1)
When installing:
• Attach the thermal pad under the solid-state drive.
• Ensure that the connector is attached firmly.
For computer models with an FCC (Factory Color Calibration) panel, the panel is color calibrated at factory
and a file containing all the color settings is installed on the computer's secondary storage device. After an
SSD/HDD replacement, follow the procedures below to re-install the factory color profile for the display
panel.
1. Make sure the computer is connected to the Internet.
2. Open the pre-installed X-Rite Color Assistant app.
Note: If the app is un-installed, re-install it by downloading the installation package from
pcsupport.lenovo.com/us/en/downloads/DS540353
3. Go to Settings ➙ Restore profiles. The app will read the serial number of the computer and download
its unique color profile from Lenovo cloud.
1060 Wireless WAN card (for selected models)
For access, remove this FRU:
• "1020 Base cover assembly" on page 66
to know the details on how to replace it.
https://
Color
Torque
Black
0.18 +/- 0.015 Nm
(1.85 +/- 0.15 kgf-cm)
https://
.
Chapter 9
Removing or replacing a FRU
69
Advertisement
Table of Contents
