Assemble Your Device - Samsung Amp Prime 2 User Manual

Assemble Your Device

This section helps you to assemble your device.
Remove the Back Cover
1. Remove the back cover.
2. Lift the cover up and to the left of the device.
Set Up Your Device
Caution: When removing the back cover, use the
slot next to the Volume key to gently lift the cover
off. Pulling on the Speaker (located next to the
Power button) may cause damage.
Do not pull
on Speaker
Warning: Do not bend or twist the back cover
excessively. Using excessive force on the cover during
removal or installation of an internal component can
cause the material to break.
5