Advertisement
ENGLISH
Introduction
Thank you for purchasing the powered Peavey PVXp™ 15 DSP powered speaker system. The PVXp™ 15 DSP
features a reliable bi-amped power section that provides a total of 830 Watts of peak available dynamic power.
With that much available power, speaker protection is critical. Advanced digital signal compression prevents
audible overload, protecting the speakers from harmful distortion at high output levels. This powered enclosure
also includes heavy duty speaker drivers; it features a 15" woofer with a 2-3/8" voice coil and a 50 oz. magnet,
this is coupled with the RX14 compression driver that includes a 1.4" titanium diaphragm on a 100-degree hor-
izontal x 50 degree vertical pattern asymmetrical horn.
The PVXp™ 15 DSP provides a balanced input via a combination jack that accepts a balanced TRS 1/4" input, as
well as a balanced XLR input and summed RCA jacks. There are two balanced Thru outputs, a male XLR and a
1/4" TRS. The LCD display and EQ presets, along with other operating parameters are accessed via a one-knob
selector.
Features
* Two-way bi-amplified analog amp powered speaker system
* 15" heavy-duty woofer with a 2-3/8" voice coil & 50 oz. magnet
* RX™ 14 compression driver, with 1.4 inch titanium diaphragm
* 630 watts peak dynamic woofer power, 200 watts peak dynamic tweeter power
* DSP processing is 64 bit double-precision
* DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional grade components
* Fan cooled for maximum reliability
* Patented Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage
* Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads.
* Input is via a combo female XLR and 1/4" TRS phone jack with balanced input
* A Mic/Line switch provides for two different gain settings
* Thru output is via a male XLR jack and 1/4" TRS phone jack
* Multiple Factory Preset EQ settings
* Rugged plastic injection-molded trapezoidal enclosure
* Full-coverage perforated steel grille, with powder coat finish
* Pole mount molded-in for 1 3/8" diameter poles
* Top, bottom and right side flying point inserts
Description
The PVXp™ 15 DSP is a two-way sound reinforcement system based on a heavy-duty Pro 15" woofer and a
RX14 titanium diaphragm dynamic compression driver mounted on a 100 by 50 degree coverage Quadratic
Throat Waveguide™. Its sleek, modern appearance, coupled with excellent performance, offer an outstanding
package. The lightweight-yet-rugged injection-molded plastic enclosure with molded-in stand mount cup
facilitates portable use for live music or P.A. sound. The trapezoidal cabinet has three handles for ease of porta-
bility, and an extra 45-degree angled section on the right side to allow use as a floor monitor. Five sets of flying/
mounting points, two on the top, two on the bottom, and one on the side, with a total of 16 cabinet inserts,
provide for the ultimate in installation flexibility. A black, powder-coated, perforated steel grille provides driver
protection and a professional appearance.
Advertisement
