Table of Contents
Advertisement
Problem
Unsatisfactory
drying result.
1) If there is an error message on the display (e.g. E51): Turn the tumble dryer off and on. Select a new
programme. Touch the Start/Pause button. If the appliance does not operate contact the service centre
and provide the error code.
2) Follow the programme description — see the PROGRAMMES chapter .
3) See the
CARE AND CLEANING chapter.
4) Only dryers with the Dryness option.
5) See the HINTS AND TIPS chapter .
6) Note: After a maximum of 5 hours the drying cycle ends automatically.
7) Follow the steam programme description.
12.1 Possible causes of
unsatisfactory drying results:
• The filter is clogged. Clogged filter
makes drying inefficient.
• The airflow slots are clogged.
• The humidity sensor is dirty.
• The drum is dirty.
13. TECHNICAL DATA
Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Sound power level
Total power
Energy efficiency class
Possible cause
1)
Steam load too low.
Incorrect programme selection.
Incorrect load/type of the cloths.
Extend the steam load.
Do the selection of the applicable
programme.
Use applicable load/type of
clothes.
• Inadequate default dryness level
settings. See chapter
default dryness level
• Room temperature is too low or too
high. Optimal room temperature is
between 18°-25°C.
850 x 596 x 636 mm (maximal 660 mm)
1105 mm
958 mm
850 mm (+ 15 mm - feet regulation)
118 l
9,0 kg
230 V
50 Hz
65 dB
1650 W
A++
ENGLISH
27
Remedy
7)
Adjustment of
Advertisement
Table of Contents
