Canon PIXMA G2570 Online Manual page 330

Hide thumbs Also See for PIXMA G2570:
Table of Contents

Advertisement

E20
A maintenance cartridge that has been installed in an-
other printer is installed.
E22
The ink absorber for borderless printing is almost full.
E25
An internal part will need replacing soon.
E28
The ink absorber for borderless printing is full.
E57
Scanning print head alignment sheet failed.
E58
Trying to start copying before you register the paper
information.
E59
The paper setting specified at the time of printing is
different from the paper information registered in the
printer.
E60
Replace Ink in Print Head cannot be performed be-
cause the maintenance cartridge is almost full.
The remaining ink level in one of the ink tanks may
have reached the lower limit line shown on the ink
tank.
E61
Scanning original has failed.
E62
Unexpected error occurred while scanning is in pro-
gress.
E67
Paper is jammed while printing business cards.
E68
E69
P02
Printer error has occurred.
P08
Printer error has occurred.
P10
An error requiring a repair has occurred.
P14
Other
Printer error has occurred.
1724
1719
2200
1717
2900
Press the printer's OK button to cancel the error.
Register the paper information (paper size and
media type) in your printer and retry copying.
Press the printer's Stop button to cancel copying.
Refer to the page corresponding to the support
code displayed on your computer screen.
2114
2116
1368
1640
3412
Press the printer's OK button to cancel the error.
Change settings and perform operations again.
What to Do When Paper Is Jammed While
Printing Business Cards
5100
5200
Turn off the printer and unplug it.
Contact your nearest Canon service center to re-
quest a repair.
Important
• Do not tilt the printer when moving it since the
ink may leak out.
• When transporting the printer for repairing it,
see Repairing Your Printer.
Turn off the printer and unplug it.
330

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pixma g2070 series

Table of Contents