Table of Contents
Advertisement
To create a Smart Connect™ event
1
From your Home screen, tap
2
If you are opening Smart Connect™ for the first time, tap OK to close the
introduction screen.
3
On the Events tab, tap
4
If you are creating an event for the first time, tap OK again to close the
introduction screen.
5
Add conditions under which you want to trigger the event. A condition could be
the connection with an accessory, or a specific time interval, or both.
6
Tap
to continue.
7
Add what you want to happen when you connect an accessory, and set other
settings as desired.
8
Tap
to continue.
9
Set an event name, then tap Finish.
To add a Bluetooth® accessory, you have to first pair it with your device.
To edit a Smart Connect™ event
1
Start the Smart Connect™ application.
2
On the Events tab, tap an event.
3
If the event is switched off, drag the slider to the right to turn it on.
4
Tap Edit event, then adjust the settings as desired.
To delete an event
1
Start the Smart Connect™ application.
2
On the Events tab, touch and hold the event that you want to delete, then tap
Delete event.
3
Tap Delete to confirm.
You can also open the event that you want to delete, then tap > Delete event > Delete.
Managing accessories
Use the Smart Connect™ application to manage a range of smart accessories that
you can connect to your device, including Xperia™ SmartTags, a SmartWatch series
watch or a wireless headset from Sony. Smart Connect™ downloads any necessary
applications and also finds third-party applications, when available. Previously
connected accessories show in a list that allows you to get more information about
the features of each accessory.
To pair and connect an accessory
1
Start the Smart Connect™ application. If you are opening Smart Connect™ for
the first time, tap OK to close the introduction screen.
2
Tap Accessories, then tap
3
Turn on the Bluetooth® function if it is not already on, then tap the name of the
accessory that you want to pair and connect with.
4
If required, enter a passcode, or confirm the same passcode on both your
device and the accessory.
To adjust the settings for a connected accessory
1
Pair and connect the accessory with your device.
2
Start the Smart Connect™ application.
3
Tap Accessories, then tap the name of the connected accessory.
4
Adjust the desired settings.
Using your device as a fitness hub with ANT+™
You can use your device with health and fitness products that also support ANT+™
technology. For example, if you go running with an ANT+™ compatible heart rate
monitor and a foot pod (to measure pace and distance), you can collect all the data
This is an Internet version of this publication. © Print only for private use.
, then find and tap
.
.
101
.
Advertisement
Table of Contents
