Dell P7524QT User Manual page 53

Select OSD items of On in Standby Mode in Personalize feature, the following message will
appear:
If adjust the Brightness level above the default level over 75%, the following message will
appear:
Adjusting to this value will increase power consumption above the default level.
Do you want to continue?
If you press any button other than the power button, the following messages will appear
depending on the selected input:
Press any key on the keyboard or move the mouse or wake it up.
If there is no display, press the monitor button again to select the correct
input source.
Dell 75 Monitor
Changing to this setting (without
power consumption,Do you want to continue?
Yes
Dell 75 Monitor
Yes
Dell 75 Monitor
No HDMI 1 signal from your device.
symbol) will Increase
No
P7524QT
No
P7524QT
P7524QT
Operating the Display | 53