Advertisement
D E S C R I P T I O N O F F U N C T I O N S
Power: This is the power switch to turn the mixer "ON" or "OFF"
AC IN: This is the Input connection for the included power supply.
Line: Line inputs (represented by the letter L, followed by the input
number) are used to connect to line level sources such as CD players,
Mini Discs, DATs, samplers, etc.
TT: TT (or phono) inputs are used to connect to turntables.
Ground: Connects to the turntable ground cable to eliminate electrical
hum. Ground cables are usually supplied with turntables
Master: Connects to an amplifier, EQ, crossover, or other outboard
signal processing.
Booth: This is a second output, like the master output. It is usually used
as a separate output in the DJ Booth for the DJ to monitor the mix
REC: This is the record output. The output level is static in this case,
there are no volume controls. It is used to connect directly to tape or CD
recorders. The volume can be set from the recording device.
Advertisement
