Table of Contents
Advertisement
22
www.aeg.com
11.3 Cleaning the condenser
If the symbol
the display, inspect the condenser and
its compartment. If it is dirty, clean it.
WARNING!
Do not touch the metal
surface with bare hands. Risk
of injury. Wear protective
gloves. Clean carefully to
avoid damaging the metal
surface.
To inspect:
1. Open the door. Pull the filter up.
2. Slide the release button on the
bottom of the door to open the
condenser door.
3. Turn the lever to unlock the
condenser cover.
Condenser flashes on
4. Lower the condenser cover.
5. If necessary, remove the fluff from
the heat exchanger and its
compartment. You can use a wet
cloth and/or a vacuum cleaner with a
brush attachment.
6. Close the heat exchanger cover.
7. Turn the lever until it clicks into
position.
8. Put the filter back.
Advertisement
Table of Contents
