Drying Special Items - Speed Queen ADE3LR User Manual

Speed queen ade3lr: user guide
Hide thumbs Also See for ADE3LR:
Table of Contents

Advertisement

Drying Special Items

Type of Load
Bedspreads
Blankets
Electric
Synthetic Fibers
Thermal Cotton
Wool
Curtains
Cotton
Fiberglass
Synthetic Fibers
Denim, Corduroy
• Choose heat for fabric.
• Dry one double or two single spreads.
• Chenille and tufted spreads will shed lint and should be dried by themselves.
• New spreads will contain loose lint. Tumble on NO HEAT Fabric Selector setting before
washing to remove loose lint.
• Dry completely.
• Choose DELICATE or NO HEAT Fabric Selector setting.
• If drying items in dryer is recommended by the manufacturer, dry as for wool.
• Do not stretch the blanket because of the wiring.
• Some electric blankets may have an insulation on the thermostats or on the wiring
which will not withstand dryer heat. Do not dryer dry unless the blanket
manufacturer says it can be done.
• Choose DELICATE or NO HEAT Fabric Selector setting.
• Some blankets are fluffy and will shed lint. Tumble on NO HEAT Fabric Selector
setting before washing to remove loose lint.
• Dry in dryer until just dry.
• Clean lint filter half way through drying cycle.
• Choose AUTOMATIC REGULAR/DELICATE cycle.
• Agitation and tumbling contribute to the shrinkage and felting of wool. Follow blanket
manufacturer's instructions for proper care.
• Use approximately five dry bath towels and place them between folds in blanket to
lessen the tumbling.
• Set dryer for 20 minutes on the TIME DRY cycle. Use REGULAR Fabric Selector
setting. Check blanket when timer reaches 10. Wool blankets must be removed from
the dryer when damp.
• Stretch item gently to shape and finish drying in a flat position.
• Choose AUTOMATIC REGULAR/DELICATE or TIME DRY cycle.
• Remove damp items for ironing or dry completely and then steam iron.
• DO NOT dry in the dryer unless recommended by the manufacturer.
• Fiberglass may shred. Particles may remain in the dryer and rub off on the next load.
• "Beta" fiberglass may be dryer dried if recommended by the manufacturer.
• Choose DELICATE or NO HEAT Fabric Selector settings.
• Allow room for tumbling to prevent wrinkling.
• Delicate or sheer curtains must be dried by themselves so they will not be snagged by
hooks or crushed by other clothes in the load.
• Some sheer curtains are heat sensitive. Dry 10 minutes only, plus the cool down
period. Remove from dryer immediately and hang.
• If the dryer has been heated from a previous load, the NO HEAT Fabric Selector
setting may be sufficient.
• Choose AUTOMATIC REGULAR/DELICATE cycle.
• Dry completely and remove from dryer when seams are slightly wet to minimize
shrinkage.
-8-
513218
Special Instructions

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ade4bfAde4brAdg3lrAdg4bfAdg4brDryer

Table of Contents