Connecting To A Video Input System; Connecting To A Pc - PROTRON PLTV-26CM User Manual

OMPLTV26CM.book Page 6 Friday, September 30, 2005 9:45 AM
Setting Up the Display

Connecting to a Video Input System

There is a composite video output on the display
that may be used to transmit the currently
displayed video to other video input devices,
such as video recorders or other displays.
To connect the display to a video input
system:
1. Using an RCA cable, connect the composite
video output (yellow) in the output block on
the display (AV OUT) to the corresponding
jack on the video input system.
2. Using two RCA cables, connect the right (red)
and left (white) audio outputs in the AV OUT
block to the corresponding inputs on the
video input system.

Connecting to a PC

Your display can be used as a computer monitor for any computer with a VGA video output. In
addition, the computer's audio output can be connected to the display and played through the
display's speakers.
To connect a PC to the display:
1. Set the video resolution on the computer to 1280 × 1024 or less before connecting to the
display (see "Specifications" on page 24 for a full list of supported modes).
In Windows, right-click on the desktop and
select Properties to bring up the Display
Properties window. Select the Settings tab.
Adjust the Screen resolution as needed,
select Apply, then select OK.
IN PU T
VI DEO
AU DI O
6