Attaching The Monitor To The Base - Acer EI2 Series User Manual

Attaching the monitor to the base

1. Unpack the box. Take out the
styrofoam and accessories.
3. Tighten base and stand arm with one
screw.
5. Flip the LCD monitor over to make it
stand upright on the desk where it will
be used. (Note: Do NOT press the
screen to avoid damage any time.)
2. Remove upper styofoam and monitor's
protected bag.
4. Tighten stand arm and monitor with
one screw, then put in the cover
rubber.
LCD Monitor Quick Start Guide - 3