Table of Contents
Advertisement
10. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
3.5-inch primary storage drive and bracket
1. Remove the computer cover. See "Computer cover" on page 46.
2. Disconnect the signal cable and the power cable from the 3.5-inch primary storage drive.
3. Pull the handle of the 3.5-inch storage drive bracket to remove the storage drive with the bracket from
the 3.5-inch primary storage drive cage.
4. Flex the sides of the bracket to remove the storage drive from the bracket.
.
Chapter 8
CRU replacement
55
Advertisement
Table of Contents
