Table of Contents
Advertisement
3
Connect all the wire harnesses
NOTE
• The number of wire harnesses may vary
depending on the model.
Assembling the Left Refrigerator
Door
CAUTION
• Install the left refrigerator door after the right
door is installed.
1
Make sure that the plastic sleeve is inserted in
the bottom of the door. Install the refrigerator
door onto the middle hinge.
2
Fit the hinge
over the hinge lever latch
a
and slot it into place. Rotate the lever
clockwise and fasten the hinge.
.
3
d
NOTE
• The number of wire harnesses may vary
depending on the model.
4
5
b
c
Connect all the wire harnesses and the
ground screw.
Push the water supply tube into the hole on
the top case and pull it through the backplate.
Hold the water supply connection and gently
push in the collet
to connect the water
d
supply line as shown. Insert the tube at least
5/8 inch (15 mm) into the connector. Insert
the clip on the joint to fasten the tube in place.
INSTALLATION
17
Advertisement
Table of Contents
