Page 1
DAILY REFERENCE GUIDE THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. You can download the Safety Instructions and the In order to receive a more complete assistance, please User Manual, by visiting our website register your appliance on: www.whirlpool.eu/register docs.whirlpool.eu and following the Instructions on the back of this booklet.
Page 2
FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE FILLING THE RINSE AID DISPENSER Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be After installation, remove the stoppers from the racks and the retaining filled when the RINSE AID REFILL indicator light in the control elastic elements from the upper rack.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com Pre-treatment of the dishes is not needed before any of the programs.
Page 4
OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. HALF LOAD TABLET (Tab) If there are not many dishes to be washed, a half load cycle...
LOADING THE RACKS UPPER RACK LOWER RACK Load delicate and light dishes: For pots, lids, plates, salad bowls, glasses, cups, saucers, low sa- cutlery etc. Large plates and lids lad bowls. should ideally be placed at the sides to avoid interferences with the spray arm.
DAILY USE 1. CHECK WATER CONNECTION The machine will switch off automatically during certain extended periods of inactivity, in order to minimise electricity consumption. Check that the dishwasher is connected to the water supply and If the crockery is only lightly soiled or if it has been rinsed with that the tap is open.
CARE AND MAINTENANCE CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS Regularly clean the filter assembly so that the filters do not clog and On occasions, food residue may become encrusted onto the spray arms that the waste water flows away correctly. and block the holes used to spray the water.
Policies, standard documentation, ordering of spare parts and additional product information can be found by: • Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com • Using QR Code • Alternatively, contact our After-sales Service (See phone number in the warranty booklet).