Table of Contents
Advertisement
Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper
fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves).
Wearing the Earphones
Wear them like earplugs. A good acoustic seal provides maximum bass.
1.
Select a sleeve.
2.
Twist and pull to remove. Push new sleeve on fully. Compress foam sleeve slightly.
3.
Insert firmly into ear. Wear cable over and behind ear. Tighten the cable and take up slack by raising the cable cinch.
Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is not forming a tight seal. Gently push the ear
phone deeper into the ear canal or try a different sleeve.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
Wearing the cable over the ear and securing it behind the head can help keep the earphones in place during physical activity.
Removing the Earphones
Grasp the body of earphone and gently twist to remove.
Shure Incorporated
4/8
Advertisement
Table of Contents
