Related Manuals for Siemens SN97TX00CE
Summary of Contents for Siemens SN97TX00CE
- Page 1 SN97TX00CE Dishwasher EN Information for Use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 7 Programmes ...... 19 1.1 General information.... 4 7.1 Information for test institutes ... 20 1.2 Intended use...... 4 7.2 Favourite ...... 20 1.3 Restriction on user group.. 4 7.3 Intelligent ...... - Page 3 13.2 Unsuitable detergents ... 32 20.3 Transporting the appliance ... 54 13.3 Information on detergents .. 32 20.4 Disposing of old appliance ... 54 13.4 Adding detergent.... 32 21 Customer Service.... 54 21.1 Product number (E-Nr.), 14 Tableware ........ 33 production number (FD) 14.1 Damage to glass and table- and consecutive numbering ware........
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating cur- ▶...
-
Page 6: Safe Use
en Safety Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. Check that there is a distance of at least 5 cm between the ap- ▶... - Page 7 Safety en Highly caustic alkaline or highly acidic cleaning agents in conjunc- tion with aluminium parts in the interior of the appliance may cause explosions. Never use highly caustic alkaline or highly acidic cleaning ▶ agents, in particular commercial or industrial products, in con- junction with aluminium parts (e.g.
-
Page 8: Damaged Appliance
en Safety WARNING ‒ Risk of burns! The blow opening of the Zeolith container becomes hot and can cause burns. Never touch the blow opening of the Zeolith container. ▶ 1.6 Damaged appliance WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. -
Page 9: Safety Systems
Safety en Children may become trapped in the appliance and suffocate. Use the childproof lock if fitted. ▶ Never let children play with or operate the appliance. ▶ WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. -
Page 10: Preventing Material Damage
en Preventing Modified or damaged water hoses Preventing 2 Preventing material may result in material damage and damage to the appliance. damage Never kink, crush, modify or cut ▶ through water hoses. Preventing 2.1 Safe installation Only use the water hoses supplied ▶ with the appliance or genuine ATTENTION! spare hoses. -
Page 11: Childproof Lock
Childproof lock en So as not to scratch the finish on ▶ 4 Environmental protec- the appliance, do not use sponges with a rough surface or abrasive tion and saving energy cleaning agents. To prevent corrosion, do not use ▶ sponge cloths on dishwashers with 4.1 Disposing of packaging a stainless steel front or rinse such The packaging materials are environ-... -
Page 12: Sensors
en Environmental protection and saving energy During the drying phase moisture Sensor set- Description from the interior of the dishwasher is ting stored in the mineral and heat energy Very sensitive Adjusts the pro- is released. The heat energy is blown gramme strength for out into the interior of the dishwasher difficult conditions of... -
Page 13: Installation And Connection
Installation and connection en installing it under a continuous work- 5 Installation and con- top that is securely connected to ad- jacent cabinets. nection Follow the safety instructions. To ensure proper operation, connect → Page 4 the appliance to the power and water Follow the instructions for electrical supply correctly. -
Page 14: Drinking Water Connection
en Installation and connection 5.4 Drinking water connec- tion Connect your appliance to a drinking water connection. Installing the drinking water connection Note If you are replacing the appliance, ¡ you must use a new water supply hose. Consult the installation instructions supplied for the steps required here. -
Page 15: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 6 Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with E number and FD num- ber → Page 55. The data you need for Customer Service → Page 54. - Page 16 en Familiarising yourself with your appliance Detergent dispenser Add detergent to the detergent dispenser. → "Detergent", Page 31 Bottom basket Bottom basket → Page 24 Dispenser for special salt Add special salt to the dispenser for spe- cial salt. → "Water softening system", Page 27 Lower spray arm The lower spray arm washes the table- ware in the bottom basket.
-
Page 17: Controls
Familiarising yourself with your appliance en 6.2 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. With some buttons you can perform different functions. 4 5 6 7 8 9 ON/OFF button and reset Switching on the appliance... -
Page 18: Programmes
en Familiarising yourself with your appliance Display Remote Start If you have activated the function and are controlling the appliance via the Home Connect app, the display lights up on the appliance. WLAN display Home Connect → Page 41 Timer programming Setting timer programming → Page 36 Remote Start → "Remote Start ", Page 42... - Page 19 Programmes en 7 Programmes You can find an overview of the pro- ted. The running time will change if grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending...
-
Page 20: Information For Test Institutes
en Programmes Programme Programme se- quence Tableware: Particularly gentle and Delicate tableware, cutlery, tem- improved drying: ¡ brilliantShine perature-sensitive plastics and Pre-Rinse ¡ glasses Cleaning 40 °C ¡ Level of soiling: Intermediate rinse ¡ Lightly adhering fresh food rem- ¡ Final rinse 50 °C ¡... -
Page 21: Intelligent
Programmes en The pre-rinse program is saved to this button at the factory. Pre-rinse is suitable for all types of tableware. The tableware undergoes intermedi- ate cleaning via cold rinsing. Tip: You can use the Home Connect app to download additional pro- grammes and save them to the button. - Page 22 en Additional functions 8 Additional functions You can find an overview of the additional functions that can be selected here. Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configuration. You can se- lect certain additional functions depending on the programme.
-
Page 23: Features
Features en Press in the levers on the right and 9 Features left on the outside of the basket. You can find an overview of the pos- sible features of your appliance and how to use them here. These features depend on the model of your appliance. -
Page 24: Etagere
en Features 9.2 Etagere Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. 9.4 Folding prongs Use the folding prongs to position tableware securely, e.g. plates. If you do not need the cutlery shelf, you can fold it up. -
Page 25: Cutlery Drawer
Features en Push the lever forwards and fold To fold down a side shelf, push the down the prongs . lever forwards and fold down the side shelf . To use the prongs again, fold them back up. To fold down the folding spines, push the lever forwards and fold The prongs audibly click into posi- down the folding spines... -
Page 26: Glasszone
en Features Pull the tab on the glassZone up 9.6 glassZone and forwards . Use the glassZone in the top basket to clean all types of glasses gently yet thoroughly. Set the slider to ON. Clean under running water. Place the glassZone in the top basket and lock in position ... -
Page 27: Before Using For The First Time
first time en Press repeatedly until the first time 10 Before using for the display shows the right value. first time You can change several settings. To save the settings, press first time approx. 3 seconds. 10.1 Performing initial start- Add detergent → Page 31. Start the Programme with the highest cleaning temperature On initial start-up or after a reset to without tableware. -
Page 28: Setting The Water Softening System
en Water softening system Water hardness Hardness range mmol/l Setting value °E 9 - 10 Soft 1.2 - 1.4 9 - 10 11 - 12 Medium 1.5 - 1.8 11 - 12 13 - 15 Medium 1.9 - 2.1 13 - 15 16 - 20 Medium 2.2 - 2.9... -
Page 29: Switching Off The Water Softening System
Water softening system en Note: Only use special salt for The water hardness is 0 - 8 °E. ¡ dishwashers. You do not need to use special Do not use salt tablets. salt. Do not use table salt. Press . Add the special salt to the dis- To open the basic settings, press penser. -
Page 30: Rinse Aid
en Rinse aid system Add rinse aid up to the max mark. Additional power consump- 0.05 tion in kWh The consumption values specified are laboratory measurements determ- ined in accordance with the currently applicable standard using the Eco 50° programme and with the factory value of the water hardness set to 16 - 20 °E. -
Page 31: Switching The Rinse Aid System Off
Detergent en Tip: Suitable detergents are available 12.3 Switching the rinse aid online via our website or from Cus- system off tomer Service → Page 54. If you find the rinse aid refill indicator Tabs irritating, e.g. when using combined Tabs are suitable for all cleaning detergents with a rinse aid compon- functions and do not need to be ent, you can switch the rinse aid sys-... -
Page 32: Unsuitable Detergents
en Detergent For better washing and drying results 13.3 Information on deter- and to avoid damage to the appli- gents ance, please additionally use Special salt → Page 28 and Rinse aid Follow the instructions on detergents → Page 30. in everyday use. Detergents marked as "organic" or ¡... - Page 33 Tableware en Add the detergent to the dry deter- Close the lid of the detergent dis- gent dispenser. penser. 50 ml 25 ml 15 ml If you are using tablets, one is The lid clicks into position. enough. Insert the tablets in a hori- The detergent dispenser will open zontal position.
-
Page 34: Tableware
en Tableware 14.1 Damage to glass and Cause Recommenda- tion tableware Highly caustic al- If you are using Only put glasses and china in the kaline or highly highly caustic al- dishwasher if it is marked as dish- acidic cleaning kaline or highly washer-safe by the manufacturer. -
Page 35: Removing Tableware
operation en For better washing and drying res- ¡ ults, position items with curves or recesses at an angle so water can run off. 14.3 Removing tableware WARNING Remove large remnants of food Risk of injury! from tableware. Hot tableware can cause burns to the To save resources, do not pre- skin. -
Page 36: Switching On The Appliance
en operation If the setting "Child-proof lock" or Press the button for the relevant ▶ "Double push" is activated, press additional function. on the upper middle section of the → "Additional functions", Page 22 appliance door twice with a short The additional function is set and interval in between. -
Page 37: Interrupting Programme
operation en The appliance switches off auto- Tip: If you press during the wash ¡ matically 1 minute after the end of cycle, the programme currently run- the programme to save energy. If ning will be interrupted. When you you open the appliance door im- switch the appliance back on, the mediately after the programme has programme continues automatically. -
Page 38: Basic Settings
en Basic settings 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Time setting 00:00 - 24:00 Set the current time. - Page 39 Basic settings en Basic setting Selection Description Water connection Cold water Set cold water or hot water connec- Hot water tion. Only set the appliance to hot water if this can be prepared with little energy and a suitable installation is available, e.g.
- Page 40 en Basic settings Basic setting Selection Description Door Opening Single push With the setting "Single push", open ¡ Child-proof lock the appliance door by pressing on Double push the upper middle section of the ap- pliance door once. The electric childproof lock is activ- ¡...
-
Page 41: Changing Basic Settings
Home Connect en Basic setting Selection Description Factory setting Reset Restore changed settings to the fact- ory settings. The settings for initial start-up must be configured. Factory setting (may vary according to model) 16.2 Changing basic settings Home Connect 17 Home Connect Tip: Connect your appliance to a mo- This appliance is network-capable. -
Page 42: Home Connect Quick Start
en Home Connect 17.1 Home Connect quick 17.2 Remote Start start You can use the Home Connect app to start the appliance with your mo- Connect your appliance to a mobile bile device. device quickly and easily. Tip: If you select "Permanent" in the Setting up the Home Connect app Basic settings → Page 40 of this Install the Home Connect app on function, the function is permanently... -
Page 43: Cleaning And Servicing
Cleaning and servicing en appliance will transmit the following Remove any coarse soiling in the types of data to the Home Connect interior with a damp cloth. server (initial registration): Add detergent to the detergent dis- Unique appliance identification ¡ penser. (consisting of appliance codes as Select the programme with the well as the MAC address of the highest temperature. -
Page 44: Machine Care
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service. -
Page 45: Filter System
Cleaning and servicing en Pour the machine cleaner into the Turn the coarse filter anticlockwise detergent dispenser until it is filled and remove the filter system . completely. Check that no foreign objects ‒ Do not place any additional ma- fall into the sump. -
Page 46: Cleaning Spray Arms
en Cleaning and servicing Carefully clean the rim of dirt 18.6 Cleaning spray arms between the coarse and the fine fil- Limescale and soiling in the dish- ter. washing water may block the nozzles Re-assemble the filter system. and bearings on the spray arms. Make sure that the locking catches Clean the spray arms regularly. -
Page 47: Troubleshooting
This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code in the table of contents and on our website siemens-home.bsh-group.com. WARNING Risk of electric shock! Incorrect repairs are dangerous. - Page 48 en Troubleshooting Fault Cause and troubleshooting E:3200 or indicator Remove the filter from the supply hose for water supply lights Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back on. Check the water connection for leaks. Restore the power supply.
- Page 49 Troubleshooting en Fault Cause and troubleshooting E:6103 lights up. Wa- Not an appliance fault. Siphon connection is still ter is not drained. closed or the wastewater hose is kinked or blocked. Check the connection to the siphon and open if ne- cessary.
- Page 50 en Troubleshooting Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds. The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. ‒ Pull out the mains plug or switch off the fuse in ‒...
- Page 51 Troubleshooting en Fault Cause and troubleshooting Remnants of food on Filters are inserted incorrectly and/or not engaged. tableware. Insert the filters properly. → "Filter system", Page 45 Engage the filters. Washing programme selected too weak. Select a more intensive washing programme. ▶ → "Programmes", Page 19 Adjust the sensitivity of the sensors.
- Page 52 en Troubleshooting Fault Cause and troubleshooting Removable streaks Tableware has been precleaned too intensely. The are present on sensors chose a weaker programme. Stubborn soiling glasses, glassware cannot be entirely removed. with a metallic appear- Only remove large remnants of food and do not ▶...
-
Page 53: Clean Wastewater Pump
Transportation, storage and disposal en Insert the pump cover and press 19.1 Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 54: Protect Appliance From Frost
en Customer Service 20.2 Protect appliance from 20.4 Disposing of old appli- frost ance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 55: Customer Service
Customer Service en Customer Service for a period of at 21.2 AQUA-STOP guarantee least 10 years from the date on In addition to warranty claims against which your appliance was placed on the seller under the purchase agree- the market within the European Eco- ment and in addition to our manufac- nomic Area. -
Page 56: Technical Specifications
en Technical specifications 22 Technical specifications Weight Max.: 60 kg Voltage 220 - 240 V, 50 Hz or 60 Hz Power rating 2000 - 2400 W Fuse 10 - 16 A Water pressure min. 50 kPa (0.5 bar) ¡ max. 1000 kPa (10 bar) ¡ Inlet rate Min. 10 l/min Water temperature Cold water. Hot water max.: 60 °C Capacity 14 place settings You can find more information about... -
Page 57: Declaration Of Conformity
BSH Hausgeräte GmbH hereby de- A detailed Declaration of Conformity clares that the appliance with Home can be found online at siemens- Connect functionality conforms to the home.bsh-group.com/uk/ among the essential requirements and other rel- additional documents on the product evant provisions of Directive page for your appliance. - Page 60 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...