Intelli-Time ® Clock; Set The Time, Date & Units - AcuRite 01129 Instruction Manual

Intelli-Time Clock
®
Intelli-Time products are pre-programmed with the correct time and date.
Intelli-Time technology instructs the time and date to set themselves. All you
need to do is select your Time Zone and Daylight Saving Time preferences. The
clock will then automatically set itself and change for Daylight Saving Time.
Set the Time, Date & Units
Press and HOLD the "SET" button, located on the back of the display until
"SELECT TIME ZONE" appears, to enter SET MODE. Once in SET MODE, the
preference you are currently setting will flash on the display.
To adjust the currently selected (flashing) item, press and release the " " or
" " buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the "SET" button to adjust the next
preference. The preference set order is as follows:
TIME ZONE (PST MST CST EST AST HAT AKT NST)
AUTO DST (ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
*If you live in an area that observes Daylight Saving Time, DST should be set
to ON, even if it is not currently Daylight Saving Time.
You will automatically exit SET MODE if no buttons are pressed for 5 seconds.
Enter SET MODE at any time by pressing and holding the "SET" button until
"SELECT TIME ZONE" appears on the display.
Set the Alarm Time
To set the alarm time, press and RELEASE the "SET" button to enter ALARM SET
MODE.
To adjust the currently selected (flashing) item, press and release the " " or
" " buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the "SET" button to adjust the next
preference. The preference set order is as follows:
ALARM CLOCK HOUR (Please note AM/PM indicator)
ALARM CLOCK MINUTE
You will automatically exit ALARM SET MODE if no buttons are pressed for
5 seconds. Enter ALARM SET MODE at any time by pressing and RELEASING
the "SET" button.
Enable the alarm by switching the ON/OFF switch (located on the side of the
display) to ON.
7