Advertisement
Quick Links
Advertisement
Related Manuals for NAMENE WATU
Summary of Contents for NAMENE WATU
- Page 1 Get ready to build your Watu Assembly instructions...
-
Page 2: Components List
Components list Watu solar light in 11 pieces Front case 5a Button sticker 5b 4 screws 2 Back case 5c 2 small screws 5d PH1 key 6 Stand (not illustrated) 3 PCB Headband (not illustrated) 4 Battery... - Page 3 Step 1 Connect the battery to the PCB electronics Connect the battery to the PCB Screw in the PCB Front case Make sure you connect to Use the PH1 screwdriver HINT HINT 3 PCB the bigger connector! 4 Battery 5c 2 small screws 5d PH1 key...
- Page 4 Step 2 Connect the back case wire to the PCB Connect the PV module 2 Back Case to the PCB Make sure you connect to HINT the smaller connector!
- Page 5 Use the PH1 key to tighten the screws! HINT 5a Button sticker 5d PH1 key Close the cases. Apply the sticker to the front Make sure you stick it down really tight! HINT Namene Solar Lights Ltd. 51 Holland Street, London, W8 7JB, UK...