Setting Optimum Resolution - Samsung Odyssey LC27G75TQSRXXU User Manual

― To detect and start a USB device faster, connect the USB device to the
, port on the product. The read/write rate will be affected by the USB device and your
PC.
― For USB-related problems caused by OS, drive programmes or software, please contact relevant suppliers.
― With the launch of various USB devices on the market, we cannot guarantee that our products are matched
with all USB devices.
― For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source.
― The super charging can only be provided through port
specification, can support a maximum current of 1.5A. The actual current value depends on the device
to be charged.
If the current is too high or an exception occurs, the over-current protection will be triggered. This is a normal
setting of the product.
― USB devices requiring high current may not be supported.
support a maximum current of 900mA, and
― The battery can be charged in the power-saving mode, but it cannot be charged when the product is powered
off.
― Charging your USB device is not possible if the power cable is disconnected from the power socket.
― The company is not liable for problems or damages to an external device caused by using an unauthorised
cable for the connection.
― Some products do not follow the USB standard, and it may cause a malfunction of the device.
, ,
. According to the USB battery charging
, ,
can support a maximum current of 1.5A.

Setting Optimum Resolution

An information message about setting optimum resolution will appear if you power on the product for
the first time after purchase.
Select a language on information message and change the resolution on your PC to the optimum setting.
― If the optimum resolution is not selected, the message will appear up to three times for a specified time even
when the product is turned off and on again.
― If you want to set the optimum resolution for your computer, please refer to (Q&A) →
resolution?"
― You can adjust the refresh rate according to the screen resolution by selecting
OSD menu.
― To enable the maximum refresh rate, set
can
Hz (C27G7*T* / C32G7*T*), DisplayPort1,
― The C27G7*T* and C32G7*T* models support QHD. Use the recommended resolution of 2560 x 1440. If UHD
resolution is sent from the input source, the displayed picture quality may not match the picture quality
coming from the input source.
"How can I change the
Game →
Adaptive-Sync / FreeSync to On or set Refresh Rate
DisplayPort2 : 240 Hz
Refresh Rate in the
to HDMI : 144
19