Standard Horizon HX890E Owner's Manual page 68

3. Select "NAME" or "POSITION" with the [CH▼]/[CH▲] key,
then press the [SELECT] soft key.
4. Press the [CH▼]/[CH▲]/[◄]/[►] key to select "←" or
"→", press the [SELECT] soft key until the character to be
changed is selected, then enter a new character.
5. Repeat step 3 through 4 until the waypoint is updated.
When finished editing, press the [FINISH] soft key.
6. Select "SAVE" with the [CH▼]/[CH▲] key, then press the [SELECT] soft
key to store the edited waypoint into memory.
7. Press the [CLR] key to return to radio operation.
Deleting a Waypoint
Press and hold

key
1. Press the [CH▼]/[CH▲] key to select
"DELETE", then press the [SELECT] soft key.
2. Press the [CH▼]/[CH▲] key to select the
waypoint to be deleted, then press the
[SELECT] soft key.
3. C onfirm the waypoint to be deleted, select
"OK" with the [CH▼]/[CH▲] key, then press
the [ENTER] soft key.
4. Press the [CLR] key to return to radio operation.
Saving a DSC Position Call as a Waypoint
When a position is received from another DSC radio the HX890 allows the
position to be saved as a waypoint.
Refer to section "10.7.4 Saving the Reported Position as a Waypoint" for
details.
66
WAYPOINT SETUP

( / key)
SELECT
WAYPOINT DIR.

( key) (
WAYPOINT SETUP
WAYPOINT DIR.
BACK
NAME:
KAREN------------
POSITION:
34 ° 25.9755
118 ° 59.4566
BACK
WAYPOINT DIR.
NAME:
STANDARD---------
POSITION:
34 ° 25.9755
118 ° 59.4566
SAVE
BACK

/ key) (
ADD
EDIT
DELETE
WAYPOINT DIR.
DELETE
366901254
SELECT BOB
Horizon-1
Horizon-2
DELETE
KAREN
Standard
USCG
BACK
S
W
CANCEL
OK
ENTER
N
W
ENTER
SELECT
key)
SELECT