SAW 14, 16, Cart Safety and operating instructions Introduction Thank you for choosing Chicago Pneumatic brand products. For over a century, the Chicago Pneumatic brand has represented performance and innovation in the pneumatic tool industry. Today the brand is found around the world on a range of pneumatic and hydraulic tools that includes breakers, rock drills, chipping hammers, clay-diggers, picks and busters, scabblers, pumps and a whole lot more.
Safety and operating instructions SAW 14, 16, Cart Drugs, alcohol or medication Safety instructions WARNING Drugs, alcohol or medication To reduce the risk of serious injury or death to Drugs, alcohol or medication may impair your yourself or others, read and understand the Safety judgment and powers of concentration.
SAW 14, 16, Cart Safety and operating instructions WARNING Hydraulic oil at high WARNING Unexpected movements pressure The machine and the cutting blade might kick back Thin jets of hydraulic oil under high pressure can towards the operator very suddenly and violently.
Page 8
Safety and operating instructions SAW 14, 16, Cart ► Select, maintain and replace consumables/ WARNING Dust and fume hazard working tools/ other accessories as recommended Dusts and/or fumes generated or dispersed when in the operating and safety instructions. Incorrect using the machine may cause serious and permanent...
Page 9
SAW 14, 16, Cart Safety and operating instructions ► Always feed the machine down in line with the WARNING Slipping, tripping and cutting blade. falling hazards There is a risk of slipping or tripping or falling, for Only use the cutting section.
Safety and operating instructions SAW 14, 16, Cart ► Immediately stop working if the machine WARNING Noise hazard suddenly starts to vibrate strongly. Before High noise levels can cause permanent and disabling resuming the work, find and remove the cause of hearing loss and other problems such as tinnitus the increased vibrations.
The cart is equipped with a water kit. The cart is not standard equipment. The SAW 14 and SAW 16 hydraulic cut-off saws are powerful, light and compact machines designed for working together with hydraulic power packs.
Safety and operating instructions SAW 14, 16, Cart Labels The machine is fitted with labels containing important information about personal safety and machine maintenance. The labels must be in such condition that they are easy to read. New labels can be ordered from the spare parts list.
SAW 14, 16, Cart Safety and operating instructions When the machine is used continuously, the oil Installation temperature will stabilise at a level which is called the working temperature. This will, depending on WARNING Whipping hydraulic hose the type of work and the cooling capacity of the Hydraulic hoses under pressure can whip hydraulic system, be between 20-40°C (68-104°F)
Safety and operating instructions SAW 14, 16, Cart use a wet cutting diamond blade and a small ♦ Connect the machine. amount of water to remove the dust and cool the Ensure that the hydraulic couplings are clean and ♦...
SAW 14, 16, Cart Safety and operating instructions NOTICE The blade can become out-of-round and When taking a break vibrate if an excessive feeding pressure is used. A lower feeding pressure can stop the vibration. ♦ During all breaks you must place the machine in Otherwise replace the blade.
Safety and operating instructions SAW 14, 16, Cart ♦ Make sure that all the attached and related equipment, such as hoses and flow dividers are properly maintained. If the machine has been dropped, carefully ♦ examine the disc. Ensure that the disc dimensions are compatible ♦...
Safety and operating instructions SAW 14, 16, Cart Noise and vibration declaration statement Guaranteed sound power level Lw according to EN ISO 3744 in accordance with directive 2000/14/EC. Sound pressure level Lp according to EN ISO 11201, EN 500-4:2011. Vibration value determined according to EN 500-4:2011. See table ”Noise and vibration data” for the values etc.
SAW 14, 16, Cart Safety and operating instructions EC Declaration of Conformity EC Declaration of Conformity (EC Directive 2006/42/EC) We, Construction Tools EOOD, hereby declare that the machines listed below conform to the provisions of EC Directive 2006/42/EC (Machinery Directive) and 2000/14/EC (Noise Directive), and the harmonised standards mentioned below.